The Final Tonalite earphones offer timbre personalisation for a more detailed, engaging, spacious and natural sound than I’ve heard on other wireless earbuds. They convincingly compete with wired IEMs for sound quality and have a secure fit, great passive isolation and ANC. But they’re pricey, a little bulky and not a top performer for battery life
- Excellent personalised sound quality
- Secure and comfortable fit
- Dedicated app for precise customisation
- Highly expensive
- Not as much reserve battery life as rivals
- Average microphone for calls
- Bulkier build that only comes in one colour

-
Using a phone camera, the Tonalite app takes a 3D scan of your head and ears.
-
The Tonalite pairs a dedicated Sony ANC chip with hybrid Fusion-G ear tips
-
Bluetooth 6.0 with LDAC and multipoint Bluetooth 6.0 with SBC, AAC, and LDAC codecs, plus multipoint connection
Everyone hears differently. So, one of the biggest challenges for personal audio products, like true wireless earbuds, is accommodating those differences in each person.
There is a lot of science that goes into how the earbuds you use every day sound, whether that’s a pair of AirPods or something from other established brands like Sony, JBL or Sennheiser.
Many of these companies have included some kind of personalisation in their products. You might have heard of Mimi or Audiodo hearing tests, designed to give you a personal audio profile, or personalised spatial audio on AirPods, which uses a scan of your ears. These approaches typically still aim to retain a bit of that “it just works” feeling. But Final Audio’s flagship earbuds, the Tonalite, are so interesting because they take time to deliver a unique experience via full 3D head-and-ear scanning.
Pronounced ”Tonalité”, with an accent, these are designed to bring to mind the French word , or the tone of music. They’re all about providing a more natural timbre for the listener, and they do this by building on a process that I previously experienced for Final’s ZE8000 earphones, the JDH (Jibun Dummy Head) service.
Our individual bodies, especially our heads and outer ears, have a big effect on how we hear sound waves. To account for this, the Tonalite app guides you to use your phone’s camera to take a scan of your body geometry, then acoustic measurements, and lastly preference tests to create a timbre profile that should sound more natural and offer a better sense of space. This is all called DTAS (Digital Twin Audio Simulation), and I’ll go into it in more depth below.
Of course, none of this science comes cheap, as the Final Tonalite earbuds cost £299. Are they worth it for a sound that’s fully customised to you?
- New design, with a deep in-ear fit
- Four sizes of foam Fusion-G ear tips
- Pocket-friendly charging case
Compared to Final Audio’s previous top models, the ZE8000 and ZE8000 Mk2, this is a completely different look. Gone is the enormous charging case and massive external stem-style design. The Tonalite have a refreshed design with a deeper fit in your ears, foam tips and a slightly bulbous bud shape that sits fairly close to your ear when worn. They lock well into place when twisted in, and the foam tips mean they’ve got excellent passive noise isolation.
They are only available in black, though, and while they’re lighter than the old Final flagship, they’re not designed to be among the lightest on the market, coming in at around 7g per bud.

Comparatively, the new Soundcore Liberty 5 Pro is about 5.5g per bud. I like that Final gives you a good number of spare tips in the box (four different sizes) and that there are replacement dust filters too. There’s also a headband and stickers for DTAS scanning, which I’ll get onto soon.
I’ve found that you can use aftermarket tips if you need to, but I’d stick with Final’s Fusion-G tri-brid ear tips. They’re made with “ultra-density foam”, “soft silicone”, and “high elastic silicone”, and have some of the best comfort and noise isolation I’ve experienced. I love the black “Shibo” finish of the buds and case, which is fingerprint-resistant, and the buds have got an IPX4 water-resistance rating, so you can confidently use these in the gym or the rain.

The controls here are a simple tap system, with three different customisation modes in the app. I was able to get them working in a way that suited me, and they’re intuitive and responsive too.
While I’ve found them highly comfortable, we’ve all got different ears, and these are definitely on the larger side and also may not suit those who don’t like foam tips. They’re still bigger than the smallest true wireless options, like AirPods, so keep that in mind. And, yes, Final has slimmed down the case, so it’s definitely pocketable now (and has a hinge that opens wide), but it is also still going to look chunky in comparison to a pair of AirPods Pro 3, for example.
- Excellent passive noise isolation
- Ambient sound mode for awareness
Final’s previous headphones and earbuds haven’t necessarily been known for great noise-cancelling. I’ve reviewed several of them over the years, and typically I’ve found Final’s approach to be “solid” rather than impressive, with a priority on not colouring the sound rather than a focus on eliminating all background din. The Final Tonalite is a significant upgrade in this department and a genuine competitor now.
ANC strength has been improved, but it’s actually the passive seal you get from the ear tips that’s doing a lot of the work here. The foam tips block a lot of sound from reaching you in the first place. With noise-cancelling on, the Sony-made chip kicks in to get rid of loads of distractions. I’ve used these on the London Underground, in windy conditions, on the streets with heavy traffic and in coffee shops. They deserve to be discussed among the other flagships, at last.

Even if the ANC is now competitive with many top-tier rivals, I’d still say it’s a step behind the most powerful options out there from Apple, Sony, and Bose in particular. To my ears, the ANC quality feels quite similar to the abilities of the JBL Tour Pro 3, with their foam tips, and that’s a pretty big compliment as those are very good.
It’s also worth saying that the ambient sound mode is significantly better, too. This was a weak point of the ZE8000, and it’s now much more reliable for realistic-sounding transparency. It is odd that the options are just for noise-cancelling on or ambient sound on, though, so there’s not an “ANC off” option.
- DTAS sound personalisation in the Tonalite app
- Volume-step optimiser and 10-band EQ
- Three touch control schemes, or fully disable tap controls
- ASMR mode to disable controls, alert sounds and voice guidance

The headline feature of the Final Tonalite is DTAS sound personalisation, so it’s worth dwelling on what it is and how it works before we get into the sound quality of these earphones. Firstly, you need the dedicated Tonalite app; they don’t work on the existing Final Connect app.
You can use the buds without the app at all and (spoiler alert) they still sound pretty great even without the extra setup. But, it’s worth going through the DTAS steps. I don’t really see anyone investing the £299 without wanting to run through the personalisation.

To get them customised to your ears, you need to wear a headband included in the box, with some AR marker stickers attached (positioned above your ears). When I first did the test, it took me around 30 minutes, but a recent firmware update has significantly sped up the process. I retested it, and it took only about 10-15 minutes.
You’re guided through the personalisation, scanning your head and ears with your phone camera, and then playing sounds that are measured by the microphones, both with and without the ear tips on. It takes several minutes, but also allows you to pause and resume your progress at multiple stages.
Overall, it’s a far simpler version of Final’s earlier bespoke ear-scanning service that was offered for ZE8000 users in Japan.

I’ll spend a little more time on the particulars of the calibration in the sound quality section below, but what I can say is that the process quite clearly improves soundstage and imaging. You get a sound that feels more encompassing, and you gain more midrange clarity and sub-bass rumble, too. These impressions may differ from person to person, but it feels clear this isn’t a gimmick and makes a difference to the listening experience.
All the features in the app are focused on the sound, so there’s nothing that feels out of place (like the latest AI extras on some rivals). The buds run on Bluetooth 6.0, and you get a volume step optimiser (allowing for small volume adjustments around your typical, preferred listening level), a 10-band EQ (to further customise your DTAS profile or the default tuning), and an ASMR mode, which disables touch controls and distracting alert sounds.
I’ve also used them for a few calls, and the quality is fine, but nothing special. It’s clearly not among the core selling points of the buds.

- 7 hours with personalised DTAS on, up to 9 hours with it off
- Up to 27 hours in total, from the charging case
- Qi wireless charging supported
- Fully charges in around 100 minutes via USB-C
Previous Final earbuds haven’t had the most competitive battery life, but the Tonalite is a much better performer, offering around 7 to 9 hours from the earbuds. The charging case pushes the total up to around 27 hours of use. This puts Final slightly ahead of some in the true wireless market, as other high-res buds can run out after about 5 to 6 hours of playback.
I tested the battery out by turning off the volume optimiser, leaving volume at 50% and playing back an Apple Music playlist via my iPhone with the custom DTAS profile active. This used AAC rather than LDAC, so you might see more drain with an Android device. Over the first hour of the test, I saw a 13% battery drain, and after three hours, there was 60% left.

For typical listening, this means you should confidently have enough juice to get you through 7.5 hours of playback, slightly over-delivering on Final’s promises. Battery life will vary, though.
Using higher volume or LDAC will drain it a little more, and turning off the DTAS profile push the buds closer to 8 hours of use, or more. But there isn’t a huge amount of reserve battery in the case, so I still think you’ll likely need a mid-week recharge if they’re your main buds.
I do like that the case has a four-dot indicator for battery, showing you at a glance with LEDs if it’s going to need a refuel. This is much better than the vague single light systems on other buds, where you may not know how much they have until the LED goes red. When they do run out, you’ll need about 1.5 hours to fully recharge over USB-C, or you have wireless charging support. It takes a bit longer, but it’s convenient.
- Custom DTAS avatar elevates clarity, soundstage and micro-detail
- 10-band equaliser and a couple of presets
- Silicone/foam ear tips enhance isolation
It won’t surprise you to hear that the smooth and natural sound quality of the custom-made 10mm dynamic drivers is fantastic. The sound experience is the main reason to buy these earbuds. Even without customisation, they’re on the same level as high-quality wired IEMs in many respects, especially for resolution and the micro-detail you can hear.
By default, this is a sound that’s incredibly clean and distortion-free. It can feel a little bit flatter if you’re switching between it and the customisation, but it’s just as deserving of praise. Billie Eilish’s Lunch is a great demonstration of the out-of-the-box abilities of these drivers; you hear tight and fast bass while they keep the whispered vocals centred. In Sam Fender & Olivia Dean’s Rein Me In, guitars feel crisp, and both singers’ voices are distinct.

However, all of this improves with customisation. The DTAS process transforms them so they sound like a pair of custom IEMs, specifically by improving instrument positioning, soundstage and the sense of space in music. With my custom profile switched on, they’re some of the least fatiguing wireless earbuds I’ve ever used. Vocals feel even more intimate and realistic, bass gains impact, there’s additional clarity through the mids, and a sparkle to highs without harshness you may hear on certain true wireless rivals.
Ludwig Göransson’s Can You Hear the Music from Oppenheimer is a tremendous test for the speed, refinement and clarity of the Tonalite, and they excel. The throbbing sub-bass is controlled and doesn’t lack texture; you can follow the rapid plucking of harps, the cello sweep and pulsing synths without any detail getting mixed up.
I then tested the low-end control and vocal performance with James Blake’s Limit to Your Love, and they’re outstanding at retaining the separation between the piano, undulating sub-bass and Blake’s vocal. The natural warmth of vocals in Morcheeba’s The Sea provides a great example of how well these avoid sharp sibilance, while you can hear incredible spatial panning in Daft Punk’s Giorgio by Moroder.
Overall, I’d struggle to pluck out flaws in these earbuds when it comes to sound. I test out a lot of earphones, and these have become some of my most-used pairs in the six months I’ve had them. They perhaps might not appeal to serious bassheads, though. Even with the EQ, it isn’t really possible to take the bass from “deep and controlled” over to a “thick and overwhelming” nightclub sound.

Should you buy it?
You want sound that's personalised to your ears
Yes, they come at a premium price, but you’re getting a genuinely tailored listening experience via Final’s head-scanning, and that’s in addition to detailed, natural audio, a secure fit, and ANC that now rivals top competitors. The price is high, but I’ve used these for months, and they’ve become some of my favourite earbuds. They’re a brilliant pick for music lovers willing to invest a little time in setup.
You want a quick setup
If you want a pair of new earbuds that “just works”, straight out of the box, the lengthy personalisation process (and all the extra settings that are worth playing with in the app) may be off-putting. Those wanting the smallest possible buds may find these still a bit large, too, so keep that in mind.
The Final Tonalite wireless buds feel like an underappreciated hidden gem when so many conversations about sound quality in this category tend to focus on the likes of Technics, Noble and Devialet.
However, these aren’t earbuds for everyone. Firstly, they’re pricey at £299. They’re also not a simple “one size fits all” solution with their involved setup process, less consumer-oriented sound, a bulkier size, and a deep in-ear fit with the foam tips. Many of us looking for great-sounding buds will get on just as well with the Sony WF-1000XM6, Bose QuietComfort Ultra Earbuds Gen 2 or Technics EAH-AZ100.
But they’re also clearly Final’s most mature true wireless effort to date. These earphones deliver clean, natural and smooth sound that you’d typically need wired IEMs to experience, and the customised DTAS mode proves that audio personalisation is more than a gimmick, enhancing the detail, clarity, and instrumental positioning in tracks.
They’re exceptional for fatigue-free listening, so I recommend them highly for any music fans willing to spend some time on personalisation.
The Final Tonalite were tested over the course of six months of use, with real-world testing including commutes on the London Underground, use at home, in busy offices, loud coffee shops and outdoor walks. They were used with an iPhone 17 Pro, MacBook Air, and Activo P1 digital audio player. The full DTAS procedure was done twice (before and after a firmware update), and battery drain testing was done.
- Tested for six months
- Tested with real-world use
- Battery drain carried out
No, once you’ve run through the setup once, your avatar profile is saved.
The stock tips are a mix of silicone and dense foam, designed to enhance the bass and give excellent passive isolation. Some who find foam tips uncomfortable may want to consider switching to tips with less of a stiff texture, but this affects sound and noise-cancelling. I tried other Final tips, like the classic E-Type series, and while they still work, I ultimately found I prefer the better seal and sub-bass of the default set.
Because the leaps between each volume increment on Bluetooth earbuds can be a bit jarring (launching you from a level that’s too quiet to too loud in one step), Final includes a “Volume-step Optimiser” so you can specify your preferred listening level and then only change the volume in smaller increments around zone. It’s fantastic for those who want to dial in a volume sweet spot.
| Final Tonalite Review | |
|---|---|
| Manufacturer | Final Audio |
| IP rating | IPX4 |
| Battery Hours | 27 |
| Wireless charging | Yes |
| Fast Charging | Yes |
| ASIN | B0G58T788G |
| Release Date | 2025 |
| Audio Resolution | SBC, AAC, LDAC |
| Noise Cancellation? | Yes |
| Connectivity | Bluetooth 6.0 |
| Colours | Black |
| Frequency Range | – Hz |
| Headphone Type | True Wireless |
| UK RRP | £299 |
| USA RRP | $329 |